Replace cartridges and turn the printer back on.Check ink levels in cartridges to ensure they are sufficient and there are no faults on individual cartridges.Also clean the contacts inside the printer (if there is a lot of build-up of ink you can use warm water and a cotton bud to gently remove it).Clean the contacts on the cartridges (you can use a pencil eraser for this step).Turn off the printer and remove all cartridges.To do this, follow the steps set out below: If clearing the paper roller doesn’t clear your Canon printer error, then try cleaning the cartridge contacts. Clear as much as you can and check if this has cleared the error 5200.Check the paper roller for any obstructions – it may not be as big as paper – there could be something small lodged there or a build-up of material.Turn off your mp610 printer and remove any cables.If this doesn’t solve your error there are some other troubleshooting steps you can try:
The printer should be working and error 5200 cleared.When prompted to insert the cartridges do so.With the printhead still removed, replace the grey bar and close the top of the printer.Lift the grey bar and take out the printhead (which includes the cartridges).Open the top of your printer to reveal the print cartridge and move it to an easily accessible position.Make sure the printer is turned on and then unplug it (this is important to make sure the cartridge holder is in the correct position).If rebooting your mp610 does not get rid of error 5200 then try the following steps: Errors are not always correctly reported and in the case of an incorrectly reported error, this will probably clear it. The first thing to do with any error on your Canon printer is to turn off the printer, unplug for about 10 minutes or so and then turn back on again. If you are getting the above error on the Canon mp610 printer it is often related to ink levels in your printer. How to fix Canon MP610 Printer Error 5200
0 kommentar(er)
